Computer/Windows/Office/ Discussion Blog

December 21, 2016

Reasonable setting up virtual memory

Filed under: computer knowledge — admin @ 5:07 pm

For virtual memory files, Windows XP for security defaults always set a lot, wasted a lot of hard disk space, in fact, we can set it to a small value. The method is: in the control panel / system / advanced / performance / settings / advanced / virtual memory / change “to the virtual memory settings window, you first determine the page file in which drive letter, and then the other drive driver disable all page file. It is recommended that you set it to other partitions, rather than the default system where the partition, which can improve the page file read and write speed, is conducive to the rapid operation of the system. According to Microsoft, the page file should be set to 1.5 times the memory capacity, but if your memory is relatively large, so that the occupied space is also very impressive, and that if the memory capacity is below 256MB, is set to 1.5 times, the maximum and minimum value, if the above 512MB, half set the memory capacity is completely feasible.

December 20, 2016

Turn off automatic error reporting function

Filed under: computer knowledge — admin @ 4:37 pm

Everyone must have such experience in Windows XP, once an abnormal program termination, the system will automatically pop up a dialog box asking if you send errors to Microsoft, which is XP in the “automatic transmission error” function, it can send an error message to the Microsoft website. Although Microsoft has repeatedly vowed that can provide strong security, not divulge personal privacy, but Microsoft may have sent to the information contained in the document you are editing or browsing information, it may contain personal privacy or confidential, so if you want to safeguard their rights, we should proceed without hesitation take this function off. Method is: click Start / control panel / system / advanced, click the error report button, and then select disable error report, the following “but in the event of a serious error notify me” can be selected.

December 19, 2016

Disable sleep function

Filed under: computer knowledge — admin @ 4:47 pm

You can sleep in memory to the current state of the system is saved to the hard disk Windows XP, when you next time, the system will not need after loading, the system initialization process, and go directly to the last time you sleep state when it started very quickly. But it takes a lot of hard disk space (like your memory size), to “control panel / power options / sleep” in its closed, to release the disk space, until then can be opened when needed. Method is: click Start / control panel / power management / Hibernate, will enable dormancy before the hook removed.

December 18, 2016

Close remote desktop

Filed under: computer knowledge — admin @ 4:55 pm

A feature of this feature is that you can let others access your desktop on another machine. In the LAN, this function is very useful. For example, you have a problem you can ask colleagues for help, he can not go to your front, directly through the remote desktop to access your machine to help you solve the problem. But for an ordinary user with only one computer, this feature is redundant, so we turn it off and not let it waste memory there. Specific operation: right click “my computer”, select “property / remote”, “remote desktop” in the “allow users to remotely connect to this computer” hook removed.

December 17, 2016

Turn off automatic updates

Filed under: computer knowledge — admin @ 3:59 pm
The automatic update is a new function of Windows XP in order to facilitate the user to upgrade the system introduced, this function can be launched when the system upgrade patch or system security patches in Microsoft, automatically remind users to upgrade their systems, but this is a requirement that users must always online, but for those of us less iron deficiency “the poor” of silver, this requirement is too harsh, so we put the “automatic upgrade” option off, to manually upgrade”.
Close the automatic update specific operation: right click my computer / property / auto update, in the notification settings column select close automatic update. I will manually update the computer.
The automatic update is a new function of Windows XP in order to facilitate the user to upgrade the system introduced, this function can be launched when the system upgrade patch or system security patches in Microsoft, automatically remind users to upgrade their systems, but this is a requirement that users must always online, but for those of us less iron deficiency “the poor” of silver, this requirement is too harsh, so we put the “automatic upgrade” option off, to manually upgrade”.
Close the automatic update specific operation: right click my computer / property / auto update, in the notification settings column select close automatic update. I will manually update the computer.

December 16, 2016

Close system restore function

Filed under: computer knowledge — admin @ 4:53 pm
“System restore” function is an important feature of Windows series operating system, when Windows running problems, restore operating system. “System restore” although useful to make mistakes, but it will make you hard at the height of the busy state, you will find that your hard disk is always busy, because Windows XP to record the operation, so that the day after reduction. If you have confidence in yourself, then do not use it, because it can account for a lot of memory.
Close the function method of system restore is: click the “start / all programs / Accessories / system tools / system restore, system restore in the interface, click the system restore settings” into the “system restore settings” window, empty “all drives off system restore check box, so Windows XP will delete the backup system restore thus, the amount of disk space to release it.
Generally speaking, in order to improve the system performance and system security system, the author suggests to open the Windows XP where drive reduction function.
“System restore” function is an important feature of Windows series operating system, when Windows running problems, restore operating system. “System restore” although useful to make mistakes, but it will make you hard at the height of the busy state, you will find that your hard disk is always busy, because Windows XP to record the operation, so that the day after reduction. If you have confidence in yourself, then do not use it, because it can account for a lot of memory.
Close the function method of system restore is: click the “start / all programs / Accessories / system tools / system restore, system restore in the interface, click the system restore settings” into the “system restore settings” window, empty “all drives off system restore check box, so Windows XP will delete the backup system restore thus, the amount of disk space to release it.
Generally speaking, in order to improve the system performance and system security system, the author suggests to open the Windows XP where drive reduction function.

December 15, 2016

Reduce load on start time

Filed under: computer knowledge — admin @ 4:29 pm

Many applications in the installation will be added to the system by starting group, every time you start the system will run automatically, which not only extend the start time and start after the completion of system resources has eaten a lot! We can reduce the loading procedure, system startup method is: select the “Start Menu” run “, type” msconfig “to start the system configuration utility, enter the” boot “label, this window lists the system startup items and sources of loading, carefully check whether you need it or loaded. Clear the check box before loading project, the project is less, the speed of natural start faster. This item needs to be restarted to take effect.

December 14, 2016

Disable extra service components

Filed under: computer knowledge — admin @ 4:17 pm
Windows XP and Windows 2000 can be used as such as Http server, mail server, FTP server, so when Windows XP started, it also launched a number of services, there are many services for those of us ordinary users is completely useless, so they turn off is a good choice. The operation of the method is: right click “my computer”, followed by the choice of “management / service and application / service”, will not be required to disable the service components.
Note: some services are required for XP Windows, after which the system will collapse. See detailed instructions confirmed after the ban.
Windows XP and Windows 2000 can be used as such as Http server, mail server, FTP server, so when Windows XP started, it also launched a number of services, there are many services for those of us ordinary users is completely useless, so they turn off is a good choice. The operation of the method is: right click “my computer”, followed by the choice of “management / service and application / service”, will not be required to disable the service components.
Note: some services are required for XP Windows, after which the system will collapse. See detailed instructions confirmed after the ban.

December 13, 2016

Optimize visual effects

Filed under: computer knowledge — admin @ 4:38 pm

Windows XP operation interface is indeed very good, good is behind at the cost of a large amount of memory, relative to the speed and appearance, we still prefer the former, right click “my computer” and click “attribute / advanced”, in the “performance” column, click “settings / visual effects” here you can see all the settings in appearance, can be manually remove some unwanted features. All the appearance of special settings such as fade, smooth rolling, sliding open all visual effects were shut down here, we can save a lot of memory.

December 12, 2016

Resume “start” menu

Filed under: computer knowledge — admin @ 3:50 pm

Windows XP new start menu is very convenient, the impact on the system resources are not. If you love the past classic menu, right-click the taskbar blank, select “properties” menu, enter the taskbar and Start Menu Properties “settings window, select the” Start Menu “tab, select” classic start menu “can be restored to the former.

« Newer PostsOlder Posts »

Powered by WordPress