Computer/Windows/Office/ Discussion Blog

January 7, 2017

Close Wahson doctor Dr.Watson

Filed under: computer knowledge — admin @ 4:56 pm

Click the “start / run”, type “drwtsn32” command, or “start / all programs / Accessories / tools / system / system information tool /Dr Watson, out of the system in the Wahson doctor Dr.Watson, leaving only the” dump all thread context “option, otherwise once the program error, the hard disk can read for a long time, and occupation a lot of space. If there is such a situation, please find the user.dmp file, delete the space can be saved a few dozen MB.

January 6, 2017

When the computer is turned off automatically

Filed under: computer knowledge — admin @ 5:16 pm
At the time of shutdown, sometimes pop up the dialog box to remind a program is still running, whether the end of the task. In fact, a little bit of modification can be used to allow Windows to automatically end these procedures are still running. Open the HKEY_CURRENT_USER\Control Panel\Desktop directory in the registry, the inside of the AugoEndTasks value changed to 1.
Note: could not find AutoEndTasks keys, if this is the case, he built a string value and changed it to the name, value is set to 1 can be.
At the time of shutdown, sometimes pop up the dialog box to remind a program is still running, whether the end of the task. In fact, a little bit of modification can be used to allow Windows to automatically end these procedures are still running. Open the HKEY_CURRENT_USER\Control Panel\Desktop directory in the registry, the inside of the AugoEndTasks value changed to 1.
Note: could not find AutoEndTasks keys, if this is the case, he built a string value and changed it to the name, value is set to 1 can be.

January 4, 2017

Speed up the shutdown

Filed under: computer knowledge — admin @ 5:40 pm

Windows XP boot speed is much faster than the previous version of the operating system, but the shutdown speed is slow. If you shut down the speed, you can modify some registry keys, can greatly reduce the time required for closing Windows. First open the registry editor, find the HKEY_CURRENT_USER\Control Panel\Desktop\, which has a key called HungAppTimeout, its default value is 5000 (if not, change it to 5000). Next, there is a WaitToKillAppTimeout key to change its value to 4000 (default is 2000). Finally, locate the registry as follows: HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\. Similarly, the WaitToKillServiceTimeout value of which is 4000. In addition, the “control panel / management tools / services” in the NVidia Driver Help service is set to manual, you can speed up the Windows off time.

January 3, 2017

Speed up the menu display speed

Filed under: computer knowledge — admin @ 5:21 pm

Select “start / run”, type regedit, pop-up registry editor, looking for [HKEY_CURRENT_USER\ControlPanel\Desktop], select the MenuShowDelay on the right side of the window, click the right mouse button, select “change”, the data changed to 100 or less (default: 400), is not recommended to use 0, so as long as the mouse is not be careful to touch all programs, the entire menu will run out of the chaos.

January 2, 2017

Enable DMA transfer mode

Filed under: computer knowledge — admin @ 5:36 pm

The so-called DMA, that is, direct memory storage mode, refers to the computer peripheral equipment (mainly refers to the hard disk) can be directly exchanged with the memory data, so as to speed up the hard disk read and write speed, improve the speed of data transmission. For some reason, the Windows XP sometimes uses the PIO parallel input and output transmission mode on the IDE channel, rather than the DMA mode. If this is the case, the user can manually change the IDE channel to DMA mode, which can reduce the device occupied by the CPU cycle. The method is: right click “my computer” and select “properties”, select “hardware” tab, click the “device manager” button, open the “device manager”, then click “IDE ATA/ATAPI controller” branch, which “IDE controller” two “main channel and IDE” “IDE minor”, were selected, in order to enter the “attribute / advanced settings, the dialog box will list the current transfer mode IDE interface connected device, check the” transfer mode “drop-down menu, all of them with” DMA (if available), click “OK””.

January 1, 2017

Cancel unnecessary network service components

Filed under: computer knowledge — admin @ 5:26 pm

Click the “start / control panel / network connection / local connection to open local connection window, click the” properties “button, open the properties dialog box, click the Advanced tab, select the limit or prevent the computer from Internet’s access to protect my computer and network” option, and then click “Settings” button and you can see all the Internet user access can be installed and running on your network service, unless you want to set up FTP or SMTP server, or to cancel all selected these items.

« Newer Posts

Powered by WordPress