Computer/Windows/Office/ Discussion Blog

June 30, 2017

CMOS setting wrong

Filed under: computer knowledge — admin @ 7:04 pm
Fault phenomenon: Power Boot self-test appeared so error: “CMOS setting wrong Press F1, to setup, Press F2 to load default setting” and then wait for your choice, if you enter the CMOS setup set whether or not, exit the CMOS setup interface, restart the computer after self-test will no longer appear the above error can be normally started running Windows XP system. If you press F2 directly in the above prompt, you can also start running the Windows XP system. However, regardless of the choice of F1 or F2 according to the normal start running Windows XP system, the computer will automatically run about 5 minutes after the black, even press the reset button on the mainframe box (reset Jian Zhengchang), can’t restart the computer (the computer or in the black screen), this must be cut off and then re energized, computer in order to restart.
Fault analysis: the message of “CMOS setting wrong”, that is some parameter value of the CMOS option is set incorrectly, then directly into the CMOS settings interface, modify that may cause some of the options of the parameter error value, after repeated modifications, the fault is still. Could it be that the BIOS program associated with CMOS is out of order? Download the model board on the Internet, and refresh the latest BIOS program. The refresh process has been successfully completed, and then restart the computer, the failure is still. Www.sq120.com recommended articles
Troubleshooting: it seems that the motherboard itself is a circuit problem. On the motherboard may cause this fault in electronic components, only the motherboard CMOS battery and BIOS chip is easy to change, but the BIOS chip refresh is very smooth, so first ruled out the possibility of BIOS chip failure. So choose to replace the CMOS battery, after the replacement, restart the computer, troubleshooting. There is no such fault again.
Fault phenomenon: Power Boot self-test appeared so error: “CMOS setting wrong Press F1, to setup, Press F2 to load default setting” and then wait for your choice, if you enter the CMOS setup set whether or not, exit the CMOS setup interface, restart the computer after self-test will no longer appear the above error can be normally started running Windows XP system. If you press F2 directly in the above prompt, you can also start running the Windows XP system. However, regardless of the choice of F1 or F2 according to the normal start running Windows XP system, the computer will automatically run about 5 minutes after the black, even press the reset button on the mainframe box (reset Jian Zhengchang), can’t restart the computer (the computer or in the black screen), this must be cut off and then re energized, computer in order to restart.
Fault analysis: the message of “CMOS setting wrong”, that is some parameter value of the CMOS option is set incorrectly, then directly into the CMOS settings interface, modify that may cause some of the options of the parameter error value, after repeated modifications, the fault is still. Could it be that the BIOS program associated with CMOS is out of order? Download the model board on the Internet, and refresh the latest BIOS program. The refresh process has been successfully completed, and then restart the computer, the failure is still. Www.sq120.com recommended articles
Troubleshooting: it seems that the motherboard itself is a circuit problem. On the motherboard may cause this fault in electronic components, only the motherboard CMOS battery and BIOS chip is easy to change, but the BIOS chip refresh is very smooth, so first ruled out the possibility of BIOS chip failure. So choose to replace the CMOS battery, after the replacement, restart the computer, troubleshooting. There is no such fault again.

June 29, 2017

How to Install and Activate Office Pro Plus 2016 Using Product Key

Filed under: office 2016 — admin @ 6:42 pm
Automatic Online Installation
Please Read carefully all steps of the instruction !!! And You Can 100% successfully Install and Activate your Office 2016 using the purchased product key.
Preparations Before Installing :
Must Uninstall Any Version Of Microsoft Office That You Installed Before From Your Computer, Or It will Cause Some Unknown Installation Errors.
Get Your License Key From our website: www.windows7keysale.net
Make Sure There Is More Than 3GB Available On Your Driver.
The Time The Installation Takes Is Related To Your Network Speed. So Just Need To Wait Patiently.
Start To Install :
Visit Microsoft Official Website: www.Office.Com/Setup
Sign in your Microsoft account. If you don’t have one, please create one.
Enter the license key we sent you. After it’s verified by Microsoft official, please choose country and language.
Click on “Get Office Now” button, it will go to your Microsoft account center where you will see the license key has already been linked to your microsoft account, then click “Install” button to start downloading and installing.
After the installation is finished, Start menu –All Application—Run Word 2016 Or Excel 2016, then office 2016 will be activated automatically.
If you need to Reinstall the Microsoft Office in the future, just need to visit http://www.office.com/myaccount —- sign in your microsoft account—click “Install” button to download and install.

Automatic Online Installation

Please Read carefully all steps of the instruction !!! And You Can 100% successfully Install and Activate your Office 2016 using the purchased product key.

Preparations Before Installing :

1. Must Uninstall Any Version Of Microsoft Office That You Installed Before From Your Computer, Or It will Cause Some Unknown Installation Errors.

2.Get Your License Key From our website:www.windows7keysale.net

3. Make Sure There Is More Than 3GB Available On Your Driver.

4. The Time The Installation Takes Is Related To Your Network Speed. So Just Need To Wait Patiently.

Start To Install :

If you already have office professional plus 2016 software setup files,after install completely,please open word.click “file”-“account”–“change product key”then put the product key,It will be activated successfully.

Or

1. Visit Microsoft Official Website: www.Office.Com/Setup

2. Sign in your Microsoft account. If you don’t have one, please create one.

3. Enter the license key we sent you. After it’s verified by Microsoft official, please choose country and language.

4. Click on “Get Office Now” button, it will go to your Microsoft account center where you will see the license key has already been linked to your microsoft account, then click “Install” button to start downloading and installing.

After the installation is finished, Start menu –All Application—Run Word 2016 Or Excel 2016, then office 2016 will be activated automatically.

If you need to Reinstall the Microsoft Office in the future, just need to visit http://www.office.com/myaccount —- sign in your microsoft account—click “Install” button to download and install.

June 28, 2017

Restart the computer repeatedly

Filed under: computer knowledge — admin @ 5:59 pm

Q: my computer started, the hard disk light flashed faintly, and then there was no response. After more than a few starts, sometimes can be normal boot, all normal after starting, no automatic restart phenomenon. Restart under the system many times, everything is normal, but after a long shutdown time again boot, and this fault will occur. I replaced the power line and it still went wrong. My computer is configured as follows: MSI KT-3, Kingston 512MB, GeForce4 MX440, two WestJet gainward hard disk, excuse me, this failure may be caused by what reason?

Answer: frequent start the computer hardware will be great damage, so for you to reflect start-up difficulties, we recommend immediate repair, do not continue to use the frequent start times of operation to start the computer. As for the cause of the failure, should find it on the motherboard and power supply, estimated to be some components of aging caused by the fault, you can check whether the motherboard capacitor CPU around the “bulge” phenomenon (capacitance in this part of the problems most will lead to fault you reflect), if there is no test conditions or have no concept of capacitance on the motherboard, you will be sent to the host suggested maintenance department to conduct a comprehensive inspection, the focus is on the motherboard and power supply.

June 27, 2017

Why do you press F1 when you turn on the PC?

Filed under: computer knowledge — admin @ 6:42 pm

Q: my computer installed Windows XP, recently do not know how, always press F1 to continue to start each boot, I modify BIOS settings and save, but the next time the boot is according to the F1, please tell me why the boot according to F1?

Answer: This is a relatively common fault. CMOS on the main circuit board in the preservation of information related to the BIOS setting, the circuit needs to save the current supply of weak information, if the power supply shortage, will lead to the loss of information, which according to the F1 prompt at boot time. First of all, you check the motherboard for CMOS power button batteries, whether there is electricity, the battery is a common CR2032 battery, the normal voltage is 3V, if less than 2.8V, it should be replaced. After the replacement of new battery still, or soon prompted, so is the relevant circuit board on the problems (such as leakage), only the motherboard replacement or repair. However, this fault will not normally affect the normal use of the machine, and can not be ignored.

June 26, 2017

How to reinstall IE

Filed under: computer knowledge — admin @ 6:13 pm
After the IE fails, when it is reinstalled, it is prompted to “find the version of IE in the system” and refuses to install; “add or remove programs” does not have uninstall options. “Reinstall” is to solve the IE fault “ultimate Dafa”, but also a primary user magic weapon.
Solution:
1., the IE 5 reinstall, you can follow the following steps:
After the IE fails, when it is reinstalled, it is prompted to “find the version of IE in the system” and refuses to install; “add or remove programs” does not have uninstall options. “Reinstall” is to solve the IE fault “ultimate Dafa”, but also a primary user magic weapon.
Solution:
1., the IE 5 reinstall, you can follow the following steps:
The first step: open the registry editor, find the [Hkey_local_machine \ software \ \ Microsoft \ Internet explorer], click the version vector button under the.
The second step: in the right pane, double-click the IE child key, change the original “5.0002” to “4”, and then click OK to exit the registry editor”.
The third step: restart, you can reinstall IE 5.
There are two ways to reinstall 2.IE 6:
Method 1:
Open the registry editor, [hkey_local_ machine, software Microsoft, found active setup, installed, components, {89820200-ecbd-11cf-8b85-00aa005b4383}], isinstalled of the DWORD value can be changed to 0.
Method 2:
In the WindowsXP installation disk, in the “start to run” window type “rundll32.exe setupapi, installhinfsection defaultinstall 132%windir%, inf, ie.inf”.

June 25, 2017

Common system process

Filed under: computer knowledge — admin @ 5:20 pm
Mdm.exe (Windows administration console)
WmiPrvSE.exe (Windows, WMI, Provider, Host)
Services.exe (Windows services and controller applications)
Inetinfo.exe (Windows, IIS, Admin, Service, Helper)
Wscntfy.exe (Windows Security Center system security warning program)
Msiexec.exe (Windows installer component)
WUDFhost.exe (Windows user mode, driver framework, host process)
Wdfmgr.exe (Windows user mode driver framework)
Alg.exe (Windows application layer gateway service)
Lsass.exe:LSA Shell (Export Version) local security authentication service
Iexplore.exe is the process (IE browser)
Csrss.exe (client server runtime)
Explorer.exe (Windows image shell program)
Taskmgr.exe (Windows task manager)
Winlogon.exe (Windows landing program)
Lsass.exe process (local security authentication service)
Dwm.exe process (desktop window manager)
Conhost.exe process (console window host)
Ctfmon.exe (Windows text input)
Conime.exe (command prompt input support)
Svchost.exe (Windows service master process)
OHotfix.exe (install client update file)
Ose.exe (Microsoft Office source engine)
Imjpmig.exe (Windows input method editor)
MMC.exe (Windows, Machine, Debug, Manager)
Smss.exe (Windows session manager)
Wuauclt.exe (automatic update of Windows system)
Spoolsv.exe (Spooler, SubSystem, App, background handler, Subsystem Application)
Wuauclt.exe (automatic update of Windows system)
Mdm.exe (Windows administration console)
WmiPrvSE.exe (Windows, WMI, Provider, Host)
Services.exe (Windows services and controller applications)
Inetinfo.exe (Windows, IIS, Admin, Service, Helper)
Wscntfy.exe (Windows Security Center system security warning program)
Msiexec.exe (Windows installer component)
WUDFhost.exe (Windows user mode, driver framework, host process)
Wdfmgr.exe (Windows user mode driver framework)
Alg.exe (Windows application layer gateway service)
Lsass.exe:LSA Shell (Export Version) local security authentication service
Iexplore.exe is the process (IE browser)
Csrss.exe (client server runtime)
Explorer.exe (Windows image shell program)
Taskmgr.exe (Windows task manager)
Winlogon.exe (Windows landing program)
Lsass.exe process (local security authentication service)
Dwm.exe process (desktop window manager)
Conhost.exe process (console window host)
Ctfmon.exe (Windows text input)
Conime.exe (command prompt input support)
Svchost.exe (Windows service master process)
OHotfix.exe (install client update file)
Ose.exe (Microsoft Office source engine)
Imjpmig.exe (Windows input method editor)
MMC.exe (Windows, Machine, Debug, Manager)
Smss.exe (Windows session manager)
Wuauclt.exe (automatic update of Windows system)
Spoolsv.exe (Spooler, SubSystem, App, background handler, Subsystem Application)
Wuauclt.exe (automatic update of Windows system)

June 24, 2017

Win7 disk defragmentation

Filed under: windows 7 — admin @ 5:41 pm

1. Go to the Windows7 system and click the start button at the far left of the desktop taskbar. Select the attachment — system tool — disk defragmentation, and double-click to open the disk defragmentation program.

2, after you open the disk defragmentation program, we can do Win7 disk defragmentation. In the software interface, we can see that it lists the disk partitions in the computer. First, we examine the partitions that need to be defragment. Select a drive, click on the bottom of the disk can be analyzed

3, after the analysis disk is complete, we can do win7 disk defragmentation. Selected have analyzed a disk drive, and then click the defragment button.

To this end, the Win7 disk defragmentation has been completed. But many friends say every time by finishing win7 disk fragmentation is very troublesome, there is no automatic win7 Defrag function? In fact, the win7 disk defragmentation tool is the function, please continue to look down.
4, planning tasks, equivalent to the regular tasks, can save you a lot of trouble. Click on the disk defragmenter interface start program button in the pop-up windows in check “run according to plan”, and the frequency, date, time, disk options such as appropriate settings, click to confirm.

To this end, the Win7 disk defragmentation has been completed. But many friends say every time by finishing win7 disk fragmentation is very troublesome, there is no automatic win7 Defrag function? In fact, the win7 disk defragmentation tool is the function, please continue to look down.

4, planning tasks, equivalent to the regular tasks, can save you a lot of trouble. Click on the disk defragmenter interface start program button in the pop-up windows in check “run according to plan”, and the frequency, date, time, disk options such as appropriate settings, click to confirm.

June 23, 2017

How to check the win10 version?

Filed under: windows 10 — admin @ 6:35 pm

Right click on this computer (or this computer), select properties from the pop-up menu, and in the subsequent “system” window, we’ll see the version information of Windows (Figure 1). However, this information is a crude version number. As shown in figure, the version number of the Windows 10 Pro version, we can only see that it is a professional version of Windows 10, and the detailed version number is not shown here.

1, display the internal version number

The same version of the Windows 10, and due to the different stages of the upgrade, there are minor versions of the difference. Press the Win+R key, and then enter the WINVER command in the run dialog box and execute. In the subsequent “Windows” information window, a more detailed internal version number is given

In addition, when you enter the CMD command in the running window and start the command prompt window, we first see the version number of Windows, which contains the internal version number (Figure 4). If you run the SLMGR/DLV command in the command prompt window, you can also see the version of the software license service in the pop-up window. Run the “SYSTEMINFO FINDSTR BUILD | command to filter out the Build to create a version number.

If the CMD is “piggyback” display internal version number, so there is a more formal order, that is the MSINFO32 command, the command is executed in the run box, the system will pop up information display window, the front two display is the Windows version of the system name and internal version number

June 22, 2017

How does win7 set screen saver time?

Filed under: windows 7 — admin @ 5:35 pm

Many users have set a screen protection on their own use of the computer, it can also when the password lock function, but some users feel into the screen saver time too fast, hope can set the screen saver for a long time, but some users do not set, the steps to see the method.

1, right-click in the desktop space, select personalized”,

Access to the control panel’s personalized interface.
2, in the pop-up personalization window, select the screen saver, enter the screen saver settings.

Access to the control panel’s personalized interface.

2, in the pop-up personalization window, select the screen saver, enter the screen saver settings.

3, after the screen protection settings page appears, how much time is modified at the waiting time, that is, when the computer is not operating at any time, it will enter the screen protection.

4, and finally click on “application save”, the operation is completed.

June 21, 2017

How does win7 cancel the boot password?

Filed under: windows 7 — admin @ 5:55 pm

When users in the use of the Win7 system, many computer users in order to protect the personal privacy and information security in the computer, so will set up a boot password to protect the computer, but in this way, users are required to enter a password when each boot, or it is very troublesome, so a lot of users it chose to cancel the computer password, but many users do not know how to perform these operations. So win7 how to cancel the boot password? Below let Xiaobian to introduce you, on the Win7 system boot password cracking specific methods of operation.

1 click the start menu, and then click the “control panel””;

2. Change the view in the control panel to “big icon”. Find the user account below and leave the button on the left;

3, click the “delete password” button;

4, in the delete password window, enter the original login password, and then click delete password”;

Older Posts »

Powered by WordPress