Computer/Windows/Office/ Discussion Blog

September 11, 2017

Primaster harddisk: S.M.A.R.T. status BAD

Filed under: computer knowledge — admin @ 6:27 pm

Q: every time I boot the computer, there will always be such a line “Primaster harddisk:, S.M.A.R.T., status, BAD, Backup, and, Replace, press, to, resume, F1” after stopping self check, click the “F1” to continue. At first I thought the hard drive was out of order, so I quickly made a backup copy. Then every time it was switched on, it has been going on for more than a year. Excuse me: why is that? Is there any danger? What should I do?
Answer: S.M.A.R.T. is the automatic detection and analysis and report technology (Self-Monitoring Analysis and Report Technology), this technique can be the head unit, the disc motor on the hard disk drive system, the internal circuit and hard disk surface media materials such as monitoring, monitoring and analysis of the S.M.A.R.T. when the hard disk problems may arise when timely alarm to users in order to avoid computer data loss. Your computer is obviously telling the hard disk that there is a risk. Even if this report is not fully trusted, you should pay enough attention to it. It is recommended that you back up the data in time, as the reported hard disk can be damaged at any time. I suggest you do the disk scan immediately, check whether the hard disk has bad sectors or other problems, such as corruption or other problems as soon as possible to deal with. If there is no problem, but also want to cancel the “F1”, “del” can boot into the BIOS settings, find “Advanced BIOS Features (advanced BIOS features)” under “HDD S.M.A.R.T. Capability”, set it to “Disabled”, it will not boot on the hard disk S.M.A.R.T. test.

No Comments

No comments yet.

RSS feed for comments on this post.

Sorry, the comment form is closed at this time.

Powered by WordPress